PLA Semi Matte: ColorFabb’sA less brittle and stunning PLA filament. Only for those who are looking to make their prints look super cool. The non-gloss semi-matte filament is all style and no compromise.
Material:colorFabb PLA/PHA
Diameter Tolerance:0.05 mm
Density:1.210-1.430 g/cm3
Glass Transition Temperature:55C
Advised 3D printing temperature: 195-220C
Advised 3D print speed: 40 – 100 mm/ sec
Advised Heated bed: 50-60C
Cooling Fan: 100% fan cooling for best aesthetics, this gives best performance on overhangs and small details. For best mechanical performance try printing with the least amount of cooling needed, for optimal layer adhesion.
Build platform: PLA/PHA performs well on both heated and non-heated build platforms. For those users printing on a cold build platform we advise applying masking tape to the build area. The rough surface of the tape will provide enough adhesion for the first layer to stick and print almost without any warping.
Technical Sheet
Download
