nGen_FLEX is best described as a semi-flexible filament with a shore hardness of 95A. It can be fed through a Bowden tube and printed at regular speeds. It is temperature resistant to about 125C. This means that printed objects can be steam sterlilized at 121C.
This means you can use both nGen_FLEX and another copolyester in one print with good adhesion properties to truly form a dual extruded model.
Material: colorFabb nGen_FLEX
Diameter Tolerance: ± 0.1 mm
Density: 1.13 g/cm3
Glass Transition Temperature: 130C
Advised 3D printing temperature: 240-260C
Advised 3D print speed: 40 – 60 mm/s
Advised Heated bed: 80C + Magigoo
Build platform: nGen_FLEX gives best results on a Magigoo covered buildplate, heated at around 80C.
How to Print
Download