Technical Parameters:
Build Volume: 25×21×21 cm (9.84″×8.3″×8.3″)
Layer height: 0.05 – 0.35 mm
Nozzle: 0.4mm default, wide range of other diameters/nozzles supported
Filament diameter: 1.75 mm
Printer color: Fully Black
Supported materials: Wide range of thermoplastics, including PLA, PETG, ASA, ABS, PC (Polycarbonate), CPE, PVA/BVOH, PVB, HIPS, PP (Polypropylene), Flex, nGen, Nylon, Carbon filled, Woodfill and other filled materials.
Max travel speed: 200+ mm/s
Max nozzle temperature: 300 °C / 572 °F
Max heatbed temperature: 120 °C / 248 °F
Extruder: Direct Drive, Bondtech gears, E3D V6 hotend
Print surface: Removable magnetic steel sheets(*) with different surface finishes, heatbed with cold corners compensation
Printer dimensions (without spool): 7 kg, 500×550×400 mm; 19.6×21.6×15.7 in (X×Y×Z)
Power consumption PLA settings: 80W / ABS settings: 120W
Consumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks, or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.
Full Features List (January 2023 Edition):
Controller: EINSY RAMBo 8-bit board with Trinamic 2130 drivers (256 microstepping), co-developed with Ultimachine, sensorless homing for X and Y axes
Mesh Bed Leveling: Advanced high-quality SuperPINDA sensor (Super Prusa INDuction Autoleveling sensor)
Print sheet profiles: Firmware supports print sheet profiles to store Live Z calibration data to enable quick switching between different print sheets.
Filament sensor: IR sensor built-in, supports filament auto-loading. Print pauses when filament runs out.
Power Panic: Hardware-based, single G-code line accuracy
Ethernet connection: via Raspberry Pi (optional)
Wi-Fi connection: via Raspberry Pi (optional)
Advanced sensors: 3 thermistors, fans RPM monitoring, SuperPINDA
Calibration: Automatic, Mesh Bed Leveling, SelfTest
Print medium: SD card (16 GB card included)
Firmware update: via PC (USB cable)
PSU: Custom-made Delta PSU with hardware-based power panic
Advanced features: Automatic filament loading, steel sheet profiles, Octoprint compatibility.
Creality Warranty Policy
- 1-year limited product warranty. The limited warranty will initiate from the date of purchase.
- A 3-month limited warranty applies to vulnerable parts, i.e., module, flat belt, glass platform, etc.
- No warranty will be on complementary gift offers with the purchased products, i.e., storage card, card reader, wrench, pliers, scraper knife, etc.
