Model: 606ZZ/606RS
Single row, pre-lubricated, normal accuracy.
Deep groove ball bearings are one of the most widely used rolling bearings. They are used to withstand radial and axial loads in both directions.
Ball bearings have low friction and high speed, are cost effective and require little maintenance.
The bearing steel is made by heat treatment, with high hardness, uniformity, good wear resistance and high contact fatigue performance.
Suitable for a variety of industrial equipment, micro-motors, small rotating electrical machines, office equipment, etc.
Selection guide:
Shield (specified suffix Z / ZZ) – High speed. Prevent dust and debris.
Seal (designated suffix RS / 2RS) – Made of steel plate reinforced NBR (oil and liquid resistant). The lower limit speed is lower than Shield Bearings.
Shield type: double shield
Inner ring / outer ring material: bearing steel
Cage material: stamped steel
Inner diameter (d): 6mm
Outer diameter (D): 17mm
Thickness (B): 6mm
Dynamic rated load (Cr): 1.95kN
Static load rating (Cor): 0.74kN
Accuracy level: P0/ABEC-1
Hardness H: 60-62/50-55
Cage type: claws
Vibration / noise level: Z1-Z4