199.00 SAR
Description
High elongation at break, good elasticity, tear resistance, tensile, bending and compression, quick rebound, a certain wear resistance. Compared with eResin-Flex, the viscosity of elastic resin is greatly reduced to ensure release and molding.
Selling point
Good elasticity
Tear resistance
Bending resistant
High toughness
Low hardness
Low viscosity
متوفر في المخزون
Print model
Notes
1.Shake well before printing
2. Slice setting:
Stronger support: Avoild break with main body
Denser support：Avoid deformation dislocation
3.Printing data
Higher lifting distance: full film realse
Lifting distance：≥6mm
Slowing down Lifting speed: avoid breaking
Lifting speed: ≤60mm/min
Control leveling time: full leveling
Light off delay≥6s
4.Post Curing
Properly control the post curing time, the longer the exposure time, the higher the hardness of the curing material, the worse the flexibility, and the heavier the yellowing
To ensure good flexibility of the material and avoid hardening problems caused by post-curing, it is recommended to clean the printed parts after printing instead of post-curing
The surface sticky hand condition will be gradually improved under the indoor weak light condition. Avoid strong light exposure for later storage
| الوزن | 0.5 kg |
|---|
